HPT series fixed axis high efficiency cone crusher

HPT series high-efficiency cone crusher series "more crushing and less grinding" principle, through reasonable cavity design and matching reasonable structural parameters and working parameters, can achieve selective crushing, even if the material is crushed along the defects of the crystal surface, which can not only save work but also ensure the best particle size, reduce over-crushing, make cone crusher have new progress in material crushing principle and bring good performance. At the same time, through the reasonable determination of the internal structure and mechanical parameters of the crusher, it can be equipped with a higher power motor to produce a crushing force far greater than that of the general cone crusher, and obtain higher output and finer and more uniform products. Widely used in sand and gravel aggregate and mineral industries. Suitable for medium and fine crushing of various mineral rocks, such as granite, limestone, quartzite and pebbles.

Features and advantages:

The machine adopts the design of "eccentric sleeve rotating around the fixed axis", which strengthens the strength of the main shaft and creates conditions for achieving high-power crushing. At the same time, by adopting the special crushing chamber designed based on the intergranular lamination principle and the matching rotation speed, the crushing ratio and output are significantly improved, and the cubic content of the finished material is increased;

In the case of iron overload and instantaneous jamming, the machine can hydraulically lift the top and automatically discharge the material, which greatly reduces the trouble of stopping the original spring cone crusher for manual discharge, making maintenance easier and more cost-saving;

Adopting hydraulic adjustment, thin oil lubrication, and labyrinth sealing, it fundamentally solves the common problems of oil-water mixing in spring cone crushers.

Flexible application, HPT series cone crushers only need to replace the fixed cone liner, movable cone liner, and heightening seat, and the crushing chamber type can be arbitrarily changed from standard coarse crushing to short head ultra-fine chamber type;

The crushing wall and rolling mortar wall are made of high manganese steel. Due to the change of the crushing chamber type and the protection of the material layer during lamination crushing, the wear is reduced;

Technical parameters: